Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Statutory Requirement - Testing

Status
Not open for further replies.
gjb1

gjb1

Mechanical
Joined
Apr 23, 2002
Messages
33
Location
GB
Could anyone tell me if there is a statutiory requirement for the calibration of electrical equipment ie load cells. The reason I ask is that mechanial lifting equipment has a statutory requirement to be inspected annually. If a load cell is incorporated into lifting equipment does what governs the testing/calibration.

Thanks in advance.

gjb
 
Status
Not open for further replies.

Similar threads

Abdul Salam Basheer
  • Locked
Minimum requirement of center plate thickness
Replies
3
Views
5K
JStephen
JStephen
elopez
  • Locked
  • Question Question
Pressure Testing Help/Recommendations
Replies
5
Views
700
Prometheus21
Prometheus21
ncnpiping
  • Locked
  • Question Question
Isolation requirement for piping and pipeline
Replies
3
Views
527
LittleInch
LittleInch
G
  • Locked
  • Question Question
Notice of Project requirements - industrial
Replies
3
Views
2K
Gr8blu
Gr8blu
Ahmed Elarbagi
  • Locked
  • Question Question
Horizontal Direct Fired Heater Minimum Stack Height Requirements
Replies
3
Views
545
shvet
shvet

Part and Inventory Search

Sponsor

Back
Top