May 5, 2020 #1 Franco T Electrical Joined Jan 26, 2019 Messages 1 Location AR Does anyone have experiencie with detecting magnetic wedges missing using CSA? It is supposed to find some peaks at tooth freq?
Does anyone have experiencie with detecting magnetic wedges missing using CSA? It is supposed to find some peaks at tooth freq?
May 6, 2020 #2 edison123 Electrical Joined Oct 23, 2002 Messages 4,517 Location IN Magnetic wedges are used to reduce magnetizing current of low speed motors. If a lot of wedges go missing, the no-load current may be higher, if you are tracking the decoupled no-load current. I doubt CSA can detect missing mag wedges. Muthu http://www.edison.co.in Upvote 0 Downvote
Magnetic wedges are used to reduce magnetizing current of low speed motors. If a lot of wedges go missing, the no-load current may be higher, if you are tracking the decoupled no-load current. I doubt CSA can detect missing mag wedges. Muthu http://www.edison.co.in