Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Static Pressure Calcs.. Equiv Length or coefficient?

Status
Not open for further replies.
dmcmike01

dmcmike01

Mechanical
Joined
Jul 26, 2007
Messages
1
Location
US
On a low pressure < 1" and 1500 fpm duct system, is the equivalent length method acceptable to determine system external static pressure, or should we be using fitting coefficients for the calc?
 
Status
Not open for further replies.

Similar threads

Samingme755
  • Locked
  • Question Question
Pressure drop for heat exchangers
Replies
5
Views
4K
MJCronin
MJCronin
Diulf
  • Locked
  • Question Question
Pressure in closed condensate tank
Replies
5
Views
1K
EdStainless
EdStainless
PeterJAM
  • Locked
  • Question Question
Calculating pressure after steam is condensed
Replies
6
Views
1K
georgeverghese
georgeverghese
YungPlantEng
  • Locked
  • Question Question
Calculating characteristic length for heat transfer along nozzle injector
Replies
0
Views
383
YungPlantEng
YungPlantEng
B
  • Question Question
Tank jacket heat transfer coefficients
Replies
3
Views
8K
BobStafford
B

Part and Inventory Search

Sponsor

Back
Top