Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Static Magnetic Field
- Thread starter venvidu
- Start date
What solver do you use? There are both maxwell and magnetostatic in ANSYS WB, in that case you could apply real magnetic flux so you can analyze the B-field and magnetic flux density among many other things. If you are using e.g static structural I would concentrate in getting the reaction forces correctly applied in the material you're using (you really couldn't do much else in ss).
//gktr
//gktr
- Status
Similar threads
- Locked
- Question
- Locked
- Question