Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Static Cyclic K Values

Status
Not open for further replies.
nbr1

nbr1

Geotechnical
Joined
Feb 29, 2008
Messages
95
Location
US
Is there a reference for interpolation of Static K values versus friction angle??
 
Sort by date Sort by votes
If you are looking for earth pressure coefficients k (active/passive) you'll find tables and/or diagrams in nearly every geotechnical textbook. I' sure one of the USACE puplication includes this data.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

DirtSmuggler
  • Question Question
Static Load Test
Replies
4
Views
5K
EireChch
EireChch
W
  • Question Question
The minimum number of piles required for static load test
Replies
6
Views
10K
wangqian
W
DTS419
  • Question Question
NYC Building Code Presumptive Load Bearing Values
Replies
3
Views
2K
CarlB
CarlB
pelelo
  • Locked
  • Question Question
Static stiffness for wind turbines
Replies
3
Views
395
pelelo
pelelo
geotechguy1
  • Locked
  • Question Question
Pile Springs / t-z / q-z curves for static analysis
Replies
3
Views
1K
KevinNZ
KevinNZ

Part and Inventory Search

Sponsor

Back
Top