Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Start-up curve for HRSG

Status
Not open for further replies.
barbe

barbe

Mechanical
Joined
Nov 11, 2004
Messages
8
Location
SK
Hallo,
I dont know , how fast I can be with my boiler (HRSG behind gas turbine) on desired parameters from cold start. How fast I can change a temperature of boiler drum, and how fast I can change a pressure ........
I know something about trend with 3°C / minute . But Im curious how look a material properties, how look this process in reality , what are experience with boiler starting .....

Thank you for everything what you can help me.

Best Regards
jaro kuruc
 
Status
Not open for further replies.

Similar threads

p6g2p6
  • Locked
  • Question Question
Literature for vertical shaft journal bearings
Replies
2
Views
4K
p6g2p6
p6g2p6
joshcarr22
  • Locked
  • Question Question
Shaft sleeve or bushing assembly for composite shaft
Replies
2
Views
925
joshcarr22
joshcarr22
tk90
  • Locked
  • Question Question
Bearing Standard for Tapered Rolling Elements?
Replies
0
Views
388
tk90
tk90
KFTKUMAR
  • Locked
  • Question Question
which bearing is more suitable for high speed oscillating motions
Replies
2
Views
443
TugboatEng
TugboatEng
shri_mechanical
  • Locked
  • Question Question
Looking for a help to identify the bearing and pulleys on brushing unit
Replies
4
Views
646
shri_mechanical
shri_mechanical

Part and Inventory Search

Sponsor

Back
Top