Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Start ,Stop & proceed to the new load step

Status
Not open for further replies.
mshreya

mshreya

Automotive
Joined
May 22, 2015
Messages
5
Location
DE
Dear all,

I am doing Static Simulation where the load(CLOAD) should be increased in the first step & when the contacts gets established between the components, the load should be stopped(Terminated) and moved into the next load step.

How can I proceed this problem and if any reference files are Existing please share.

Thanks
Shreyas
 
Sort by date Sort by votes
Thats only possible with a UAMP subroutine.
 
Upvote 0 Downvote
Hi,

Thanks for the reply..

Is it possible to share example or reference file?

Thanks
Shreyas
 
Upvote 0 Downvote
Search in the documentation main page and you'll find examples in different books.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
Invalid Restart Step Error (Static to Explicit)
Replies
3
Views
2K
an_02
A
V
  • Locked
  • Question Question
Warning: New nodes or elements have been added to the mesh in instance [xxx] ' but are not included in any assembly sets or surface
Replies
3
Views
3K
FEA way
FEA way
B
  • Locked
  • Question Question
Can I use a static linear perturbation step in ABAQUS?
Replies
3
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way
polak7
  • Solved
ECAP - material flows between the punch and the die?
Replies
4
Views
6K
polak7
polak7

Part and Inventory Search

Sponsor

Back
Top