Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Standard Reference for transmission/distribution design
- Thread starter NWEng
- Start date
I would recommend the following to start:
Gas Engineer's Handbook
GEOP Series: Pipelines/Planning and Economics, Book 1, Vol. II
GEOP Series: System Design, Book 1, Vol. III
See the attached AGA webpage.
Gas Engineer's Handbook
GEOP Series: Pipelines/Planning and Economics, Book 1, Vol. II
GEOP Series: System Design, Book 1, Vol. III
See the attached AGA webpage.
ASME B31.8
David Simpson, PE
MuleShoe Engineering
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
The harder I work, the luckier I seem
David Simpson, PE
MuleShoe Engineering
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
The harder I work, the luckier I seem
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question