Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Standard Confusion

Status
Not open for further replies.

ribrin

Mechanical
Joined
Jun 6, 2005
Messages
6
Location
US
I am interested in the difference between OTI 95 634 and IMO A 754 (18). Is one standard more appropriate for petrochemical jet fire applications?

 
Thanks for the response. I am trying to protect jet fire/hydrocarbon for 2 hrs. onshore/offshore for petrochemical facilities with an intumescent product. SwRI has stated IMO but most others say OTI. How is one to know.
 
Are you trying to protect storage tanks, piping, or structual elements of the rig.
Not an engineer, but
I would question the response rate of the intumescent product. Will it react quick enough to provide the protection, will it stand up to the enviromental conditons and still work.
 
I am thinking about storage and stuctural members. The feedback results from military indicates exceptional performance that offers protection in the scenario you outlined. However, military testing is not as recognized in the commercial arena hence my initial inquiry.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top