Joe Greulich
Materials
Am looking for a website that has data on chloride and sulfate resistance, to evaluate effects of corrosion. Most of the information I can only says has excellent corrosion data, not actual numbers
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
stainless steel 17-4 chloride resistance data
- Thread starter Joe Greulich
- Start date
- Status
EdStainless
Materials
Are you after pitting resistance or cracking resistance?
The HT condition matters a lot, for both factors.
In general 17-4 has so-so corrosion resistance.
No as good as good of pitting resistance as 304, and serious environmental cracking issues unless you are in a H11 or 1150 condition.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
The HT condition matters a lot, for both factors.
In general 17-4 has so-so corrosion resistance.
No as good as good of pitting resistance as 304, and serious environmental cracking issues unless you are in a H11 or 1150 condition.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Question