Is there any easy way to see shear/moment diagrams for complete beams (ie, not just from node to node, but from support to support)? I understand that you can see the shear/moment diagrams for a specific beam number, but after creating physical members in the steel design module, i would like to see the shear/moment diagram of the full beam.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Staad Shear/Moment Diagrams on physical member
- Thread starter rharting
- Start date
vickings99
Civil/Environmental
Hi!
If you click on the icon of the "Select Physical member cursor" and you then (double)click on the physical member that you are interested in, you can finally see the diagrams that you want for the whole member.
If you click on the icon of the "Select Physical member cursor" and you then (double)click on the physical member that you are interested in, you can finally see the diagrams that you want for the whole member.
- Status
Similar threads
- Locked
- Question