Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
SS Alloy identification
- Thread starter Spocky
- Start date
EdStainless
Materials
I presume that this is over plain steel.
How thick? How many passes?
How did you do the analysis? Did you have good sample preperation?
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
How thick? How many passes?
How did you do the analysis? Did you have good sample preperation?
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
- Thread starter
- #3
EdStainless
Materials
I am thinking of things like ER312 (S31380), 19-9 (S30880), ER209 (S20980),
The Cr seems high for the Ni and Mn.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
The Cr seems high for the Ni and Mn.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
That is reasonably close to the analysis of 2304, duplex stainless alloy.
Michael McGuire
Michael McGuire
- Status
Similar threads
- Locked
- Question
- Locked
- Question