hsvrocketdude
Aerospace
I have a spot welded sheet metal structure that I am modelling. I need to determine the forces acting on the spot welds. Does anyone know how to extract the forces form the spot welds that ANSYS creates?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Spot Weld Forces in ANSYS 1
- Thread starter hsvrocketdude
- Start date
- Status
-
1
- #2
ansysfreak
Civil/Environmental
Hi
You can get all nodal forces with the nodal calc commando in the general postproc. Use the summation pt. commando and then the total forces sum. The get all the nodal forces. Hope it helps
grtz garry
You can get all nodal forces with the nodal calc commando in the general postproc. Use the summation pt. commando and then the total forces sum. The get all the nodal forces. Hope it helps
grtz garry
- Status
Similar threads
- Locked
- Question
- Locked