Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

spool valve clearances

Status
Not open for further replies.
Dave2

Dave2

Mechanical
Joined
Apr 3, 2002
Messages
1
Location
AU
What are the typical running clearances common in linear and rotary spool valves? Are they different for hydraulic and air valves?
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
Use of Gate Valve for Throttling
Replies
9
Views
6K
ASA2025
A
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
35jacob35
  • Locked
  • Question Question
Valve Paint Aplication
Replies
3
Views
3K
SJones
SJones
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567
neroverdi41
  • Question Question
Control Valve CFD Analysis
Replies
11
Views
9K
neroverdi41
neroverdi41

Part and Inventory Search

Sponsor

Back
Top