Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Split part bodies into their own part automatially

Status
Not open for further replies.

jaredsmiller05

Automotive
Joined
Nov 12, 2015
Messages
5
Location
US
Hello,

I have a part that has 50 or so part bodies from a supplier. In order to run a simulation, I have to take those part bodies and make them into their own part. Does catia have anyway to automate this process? or has anyone written a macro in order to do this?

Thanks!
 
Yep. Google for CATIA Portable Script Center or search here.
 
Could you elaborate Jenia? I am not familiar with the portable script center
 
Ferdo,

Thanks for the explanation.....Do you have a recommendation of where I can find a download?
 
If they didn't think about this upfront, I'd just do it the old fashioned way, by hand and then let 'em pay for it. Basterds.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top