Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Spacing of Screw Piles

Status
Not open for further replies.

ooox

Structural
Jun 22, 2009
95
Hi All,

I'm sizing up a 3 pile pilecap supported on screw piles. Anyone aware of the minimum spacing of piles that can be adopted?

Thanks in advance
 
Replies continue below

Recommended for you

2009 IBC 1810.2.5 says analyze group effects on axial behavior where the center-to-center spacing of the deep foundation elements is less than three times the least horizontal dimension of an element.
For a 3 pile footing I would batter them slightly outwards for lateral so spacing would not be critical.

 
We typically used (Spain) 3.5 diameters, and 2.5 as a minimum. On exceptional causes I have seen some at 2 diameters (all on axes).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor