I have two L-Shaped anchor bolts that will be cast in place into a concrete block. I am trying to figure out where to find info on minimum spacing and edge distance (the manufacturer does not provide for these bolts.) The bolts are 1 1/4". Embedment length is 18", thread distance is 6" and the length of the leg in the 90 degree bend is 6 inches. I would appreciate any point in the right direction. Thanks..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Spacing and Edge Distance in L-shaped Anchor Bolt
- Thread starter rocklin
- Start date
- Status
Similar threads
- Question
- Locked
- Question
