spaceball 4000

[rrobin9845]

Can u use a SPACEBALL 4000 with solid works
2001 or 2003

 

[vlong]

Yes with 2003

 

[TateJ]

I'm using a SpaceBall 4000 FLX with SolidWorks 2003.
I'm digging it - not for ergonomics or efficiency reasons - but because it's so dang cool.
If I were getting one for personal use - I'd check e-bay for an older model.
The drivers are probably still available.
Happy hunting...

tatej usfilter.com​

 

[JNR]

Yes and or no as the case may be!!!!!! It may take some research in old threads (including some there are headed with performance/speed and other titles). It depends on the SP's you are using and on the Spaceball driver versions, plus some graphics card and driver issues.

The Spaceballs should work great. I won a 3000 at the first SW World and it still works great.

3/4 of all the Spam produced goes to Hawaii - shame that's not true of SPAM also.......

 

[rrobin9845]

So how do i do it what am i missing

 

[SBaugh]

Drivers and add-ins. Thats how you use it if you have the spaceball there.

http://www.3dconnexion.com/downlink.asp

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
When in doubt, always check the help