SP2 is out 1

[SBaugh]

SP2 looks like it was released today.

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

faq731-376

 

[smcadman]

Dang it, it must be buried somewhere because I can't find it. I only see the SP2.0 EV.

Flores
SW06 SP1.0

 

[PDMAdmin]

Click on the download for SP1.0. You'll see it there.

 

[Theophilus]

Yeah, this happens every time. When it's there, you need to go to the download section to see it. For some reason, SW doesn't post the SP availability as soon as they post the SP itself.

Thanks, Scott.


Jeff Mowry

http://www.industrialdesignhaus.com

Reality is no respecter of good intentions.

 

[SolidsMaster]

What everyone's luck with SP2.0, I've heard mixed reviews of problems. I just went to 2006 Last week on SP0. So far so good.

John

 

[CADGemini]

All of us here had issues with Toolbox not updating properly. Which caused systems to crash when inserting a second toolbox fastener. Solidworks is still looking into the issue for us but so far no fix to the problem. We ended up rolling back all the systems to SP0.0 until we here more on a fix.

However our VAR updated to 2.0 and they do not experience this toolbox issue. I also talked with others in this forum and they have not seen this issue either. I think it might be a software conflict on our side. My next plan of action is to run a free file utility that will monitor what files solidworks acesses when the error occurs.

Best Regards,
Jon

Challenges are what makes life interesting; overcoming them is what makes life meaningful.

Solidworks 2006 SP0.0

 

[SBaugh]

I guess you are going to run File Monitor - that is real handy when determining what the computer is doing.

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

faq731-376

 

[CADGemini]

Yes exactly. My VAR suggested FileMon.exe

But now I have to upgrade a system to 2.0 before running FileMon. Right now I am too busy to do such a task.

Best Regards,
Jon

Challenges are what makes life interesting; overcoming them is what makes life meaningful.

Solidworks 2006 SP0.0

 

[Ferris]

Greetings all.

I just downloaded the SP0.0 to SP2.0 patch. (Wow, almost 89MB) Is this an all inclusive update, or do I have to install the edrawings and help patches as well?

Thanks for your help.

 

[SBaugh]

All SP are only SW... the help and add-ins, such as Edrawings are separate DL's.

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

faq731-376

 

[BrianL]

jksolid, did you ever find a solution to your toolbox problem. I am experiencing the same problem, SW 2006 SP 2.0 freezes up when a second toolbox fastener is inserted.

 

[SBaugh]

Take that to a new thread BrianL

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

faq731-376