Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SOS pipe!!

Status
Not open for further replies.
pipelinevzla

pipelinevzla

Mechanical
Joined
Feb 18, 2009
Messages
6
Location
PE
Someone recommends the use of PIPE LONGITUDINAL SEAM to the following conditions:

Design Pressure: 1500 psi
Gas volume: 1500 MMPCND
H2S: 12 ppm
CO2: 7-8% molar
H2O: 5 lb / MMPCND
Material pipe: API 5L X70

reggards
 
Sort by date Sort by votes
OK, was there a question there?

David
 
Upvote 0 Downvote
with the conditions mentioned above, there is someone to recommend the use of pipes with longitudinal seams?
 
Upvote 0 Downvote
Welded API 5LX-70 is most often specified for similar service conditions.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mariolucas75
  • Question Question
Tangential Radiography of 16" pipe
Replies
10
Views
10K
DekDee
DekDee
T
  • Question Question
Vertical pipe support load
Replies
11
Views
11K
ttoonnyy
T
mariolucas75
  • Question Question
Welding of duplex SS pipe 30 "
Replies
4
Views
5K
SJones
SJones
kaffy
  • Locked
  • Question Question
Pipe Clamp Connection
Replies
2
Views
2K
LittleInch
LittleInch
T
  • Locked
  • Question Question
Pipe inlet design
Replies
14
Views
5K
GD2
GD2

Part and Inventory Search

Sponsor

Back
Top