Solidworks Tutorials by SolidProfessor

[achen]

Introduces the how parts are created using combinations of features
http://solidprofessorstore.com/publi...83dsk01_01.wmv

Describes the various components of the SolidWorks interface
http://solidprofessorstore.com/publi...83dsk01_02.wmv

Explains how to use Edit Sketch and Edit Part modes
http://solidprofessorstore.com/publi...83dsk01_03.wmv

Explains how to use the line tool within a sketch
http://solidprofessorstore.com/publi...83dsk01_04.wmv

Explains how to use the rectangle tool within a sketch
http://solidprofessorstore.com/publi...83dsk01_05.wmv

Explains how to use the various circle and arc sketch entities
http://solidprofessorstore.com/publi...83dsk01_06.wmv

Explains how manual geometric relations can be added to control a sketch
http://solidprofessorstore.com/publi...83dsk01_07.wmv

Explains how dimensions are used to define and control a sketch
http://solidprofessorstore.com/publi...83dsk01_08.wmv

Explains how to extrude a 2-D sketch into a 3-D part
http://solidprofessorstore.com/publi...83dsk01_09.wmv

Explains how to remove material based on a sketch
http://solidprofessorstore.com/publi...83dsk01_10.wmv


Their website: http://www.solidprofessor.com