Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Solidworks SwCreateMST.exe

Status
Not open for further replies.

tkutil

Computer
Joined
Jan 31, 2002
Messages
2
Location
US
I am using SwCreateMST.exe to create a transform file that I then deliver via Active Directory. After I create the transform and use MSIEXEC to test the MST file that was just created the Add-In's like toolbox are not available. If I do not use the MST file and install from the admin image I do get the add-in's. Any ideas. This is my command line to create the MST file.

SwCreateMST.exe English_i386_SolidWorks.Msi SOLIDWORKSSERIALNUMBER="0010003051927070" SERVERLIST=25734@mks00w0 OFFICEOPTION=1 UNITSELECTION=2 DIMENSIONINGSTANDARDSELECTION=1 INSTALLWDS=0 ENABLEPERFORMANCE=0 ADDLOCAL=English,SolidWorksAnimator,SolidWorksTaskScheduler,FeatureWorks,InstantWebsite,PhotoWorksRender,SolidWorksToolbox,SolidWorksUtilities,RealViewGraphicsdisplay
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top