Nov 2, 2008 #1 MorganR Mechanical Joined Nov 1, 2008 Messages 3 Hi, im have a problem with the graphics display. The picture says all: Anyone have any ideas whats wrong? Thanks
Hi, im have a problem with the graphics display. The picture says all: Anyone have any ideas whats wrong? Thanks
Nov 2, 2008 #2 CorBlimeyLimey Mechanical Joined Nov 5, 2003 Messages 15,292 Location CA If other programs run OK, then probably your video card and driver are not suitable for running SolidWorks. http://www.solidworks.com/sw/support/videocardtesting.html Upvote 0 Downvote
If other programs run OK, then probably your video card and driver are not suitable for running SolidWorks. http://www.solidworks.com/sw/support/videocardtesting.html
Nov 2, 2008 Thread starter #3 MorganR Mechanical Joined Nov 1, 2008 Messages 3 Hi, thanks for the quick reply. I thought this but ive used 2007 with no problems at all? :S Thanks Upvote 0 Downvote
Nov 2, 2008 #4 CorBlimeyLimey Mechanical Joined Nov 5, 2003 Messages 15,292 Location CA The video driver required for between versions of SolidWorks are almost always different. Check yours against the listings in the link I gave. Upvote 0 Downvote
The video driver required for between versions of SolidWorks are almost always different. Check yours against the listings in the link I gave.
Nov 2, 2008 Thread starter #5 MorganR Mechanical Joined Nov 1, 2008 Messages 3 Hi, thanks for your help. I updated my driver and Success!!!! Thanks Very Much!!! Upvote 0 Downvote
Nov 2, 2008 #6 smcadman Mechanical Joined Nov 6, 2002 Messages 1,589 Location US Interesting pattern... what's the frequency, Kenneth? is your Benzedrine, uh-huh Flores Upvote 0 Downvote