EnglishMuffin
Mechanical
I've heard that Service Pack 1 is out for Solidworks 2004. Does anyone have any feedback on what they have fixed or haven't fixed etc ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Solidworks 2004 Service Pack 1
- Thread starter EnglishMuffin
- Start date
- Status
Go to the SW website. There you can look up what was fixed.
Regards,
Scott Baugh, CSWP![[wavey3]](/data/assets/smilies/wavey3.gif "[wavey3] [wavey3]")
![[fish]](/data/assets/smilies/fish.gif "[fish] [fish]")
3DVision Technologies
faq731-376
Regards,
Scott Baugh, CSWP
3DVision Technologies
faq731-376
I forgot to add that is confidental that's why they should not be posted. You have to log in under your Subscription support to get access to the page.
Regards,
Scott Baugh, CSWP
3DVision Technologies
faq731-376
Regards,
Scott Baugh, CSWP
3DVision Technologies
faq731-376
- Thread starter
- #4
EnglishMuffin
Mechanical
Which I don't have. So I suppose I am not going to be able to find out, until someone breaks the "confidentiality" barrier. I have been waiting until this service pack came out to purchase 2004, instead of an old personal 2001 edition which I am using now.
- Status
Similar threads
- Locked
- Question
