Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SOLID OBJECTS????

  • Thread starter Thread starter ander
  • Start date Start date
Status
Not open for further replies.
A

ander

Guest
I would like to know how i could made a simple cylinder using protoolkit functions.

I know how to made a simple circle but I'm not able to do a 3D part using those functions.
 
If it's ProE you're using then you should be able to create a cylinder by exruding a protrusion.
 
If it's ProE you're using then you should be able to create a cylinder by exruding a protrusion.
 
Status
Not open for further replies.

Similar threads

I
Missing parts while importing CREO project in SOLIDWORKS
Replies
3
Views
4K
MrCool
M
imaks
  • Locked
  • Question Question
Missing parts while importing CREO project in SOLIDWORKS
Replies
0
Views
254
imaks
imaks
freerangequark
  • Locked
  • Question Question
Mesh to Surface or Solid
Replies
2
Views
896
freerangequark
freerangequark
D
Help Required to cut solid using surface
Replies
1
Views
10K
design-engine
D
M
Intersection between two solids to obtain liquid inside a container
Replies
2
Views
7K
design-engine
D

Part and Inventory Search

Sponsor

Back
Top