Solid Edge sketches not shown in pathfinder.

[andries41]

Hi,
I made an Solid Edge macro with visual basic. When i start the macro the programm wil make the lines i wanted. But i can't do anything with the lines, they are not shown in pathfinder. And wehn i save the file, the lines are gone. I tried an example from the solid edge programmers guide, but the same thing heppens. Also, In that example, the part modeling example, the sketch isn't getting protrused.
Anyone knows this issue, and can help?

Thank is advance

 

[davemerritt]

If you have questions on SE programming the best please to go is the Jason Newell site:

[link

http://www.jasonnewell.net/forums/

]

http://www.jasonnewell.net/forums/

[/url]

-Dave

http://about.me/davidmerritt

 

[andries41]

Thank you, but i already have done that a couple of times. But i don't get any responses so that's why i posted it here.