solenoid valve (pilot type) 2

[genoc]

I have a soft water modification project where we have 4 soft water regen tanks. Each of these tanks has 5 control valves (diaphram type). I am wanting to control these valves with a pneumatic solenoid valve. Here lies the beast, does anybody make a solenoid valve with 5 solenoids, and 5 pneumatic outputs (to the individual valves). The 5 solenoids would be controlled by 5 digital outputs from a DCS system. The object is to have a multi solenoid system with a small foot print so as to install it in a nema 4x enclosure (realestate is a premium).
Does anyone make such a solenoid beast?

Thanks in advance!
GenoC

 

[Compositepro]

It's called a manifold and many companies make them.

https://www.clippard.com/downloads/...s_and_Manifolds/Electronic_Manifold_Cards.pdf

 

[hydromech]

They are called valve islands...

http://resources.norgren.com/document_resources/en/N_en_5_4_115_VM10.pdf

 

[dbaird]

Review thread248-250348

David Baird
Sr Controls Designer
EET degree.

http://www.afctool.com