I have modeled pile-supported wharf structure in abaqus with p-y curve soil spring method. i create soil spring with wire features in abaqus and I make 2D model. when I applied static loading my model is worked but when I apply ground motion to the bottom of my model the simulation is cracked. i don't know where is the problem in my model. when I remove spring the simulation is complete but when I apply spring than error occur.
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
soil-spring and error in abaqus
- Thread starter sami8020
- Start date
- Status
Similar threads
- Locked
- Question