afzalw
Civil/Environmental
- Jul 16, 2010
- 10
Which test results are used to calculate the allowable bearing capacity of soil?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Soil - Bearing Capacity ?
- Thread starter afzalw
- Start date
- Status
- Thread starter
- #3
FixedEarth
Geotechnical
Afzal-this forum is not a place to learn the basics of foundation design. You can start building your own technical library slowly. You can start with "Foundations and Earth Retaining Structures" by Budhu and then go from there.
- Thread starter
- #5
FixedEarth
Geotechnical
Try this link:
ftp://ftp.eng.auburn.edu/pub/eltondj/Literature%20geotech/EPRI%20soil%20properties%20estimation%20manual%20EL-6800.pdf
Also see if you can find a senior engineer as a mentor. Good luck.
ftp://ftp.eng.auburn.edu/pub/eltondj/Literature%20geotech/EPRI%20soil%20properties%20estimation%20manual%20EL-6800.pdf
Also see if you can find a senior engineer as a mentor. Good luck.
- Status
Similar threads
- Locked
- Question
