mustangs
Mechanical
- Jul 23, 2002
- 19
I am recycling recovered glycol (ethylene, aircraft deicing fluid) and turning it into automotive antifreeze. The only problem I have is that the antifreeze is needs to be softened to meet some manufacturer's automotive spec.
I am a mechanical engineer and not too proficient with chemistry so any suggestions on ways to soften a fluid would be appreciated.
The fluid is slightly higher than 50/50 concentration by volume of ethylene glycol.
I am a mechanical engineer and not too proficient with chemistry so any suggestions on ways to soften a fluid would be appreciated.
The fluid is slightly higher than 50/50 concentration by volume of ethylene glycol.