I am getting error messages when I try to use the alignment commands in the design module of softdesk 8. The error messages state that there is a problem in reading data from alignment database as well as error messages stating cannot access alignment database. This is only happening in one project, in other projects the commands work. Any suggestions would be greatly apppreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Softdesk Version 8 Point Alignment Database
- Thread starter SPW
- Start date
cgarlick
New member
- Aug 4, 1999
- 19
This is really a autodesk (software question). This error is a corrupt database alignment Autodesk has a suggest method to fix this problem. It can be found at discussion.autodesk.com.
I am not giving you the address intentionally so you can learn how to use their knowledge base yourself as it is very handy. However, if you have problems finding this information, please let me know!
Chris
I am not giving you the address intentionally so you can learn how to use their knowledge base yourself as it is very handy. However, if you have problems finding this information, please let me know!
Chris
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question