Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Socket-O-Let Dimension
- Thread starter mytsurfer
- Start date
mytsurfer:
You posted a similar question on sockolets back in Sep 03. You even spelled sockolet correctly. You were given the nformation you asked for along with a useful URL. It took me about 3 seconds to find your original post. Can you not search the site or even remember your own question?
You posted a similar question on sockolets back in Sep 03. You even spelled sockolet correctly. You were given the nformation you asked for along with a useful URL. It took me about 3 seconds to find your original post. Can you not search the site or even remember your own question?
- Thread starter
- #3
mytsurfer,
You can find everything you need to know about Sockolet's at or call the bonney technical department at 814-542-2545.
You can find everything you need to know about Sockolet's at or call the bonney technical department at 814-542-2545.
It didnt take me much longer:
Heres the link to the tread:
Another tread:
Try use the sear function in the top (with the seach work "weldolet" and you will get a lot of treads where this subject is discussed.
Best regards Morten
Heres the link to the tread:
Another tread:
Try use the sear function in the top (with the seach work "weldolet" and you will get a lot of treads where this subject is discussed.
Best regards Morten
- Status
Similar threads
- Question