I'm looking for the reference spec for inch series internal snap rings for a one inch bore. Mcmaster #98409A211. In the Machinery's Handbook it list MS 16624 for the external series but list nothing for the internal. Is it the same spec? I would like to reference the spec on my drawing. If anyone with snap ring experience could shed some light it would be greatly appreciated.
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Snap ring Spec
- Thread starter Keveo
- Start date
eromlignod
Mechanical
- Jul 28, 2006
- 402
MS-16625C - Ring, Retaining, Internal, Basic.
Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)
"First they ignore you, then they ridicule you, then they fight you, then you win." - Mahatma Gandhi
Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)
"First they ignore you, then they ridicule you, then they fight you, then you win." - Mahatma Gandhi
diskullman
Industrial
16624 external, 16625 Internal
Russell Giuliano
Russell Giuliano
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question