Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Small vacuum pumps
- Thread starter shinyflea
- Start date
PackagingProjectEng
Mechanical
Never heard of this brand, they look like they would only draw a very slight vacuum.
Some of their equipment looks like it might only be a vacuum blower and not an actual vacuum pump.
Also 15" hg is not a very deep vacuum at all, are you sure this final pressure is sufficient for your application?
Two big vacuum manufacturers I have come across are Busch & Edwards.
I recommend researching their oil flooded rotary vane pump range.
They will probably be more expensive then GSE however.
Some of their equipment looks like it might only be a vacuum blower and not an actual vacuum pump.
Also 15" hg is not a very deep vacuum at all, are you sure this final pressure is sufficient for your application?
Two big vacuum manufacturers I have come across are Busch & Edwards.
I recommend researching their oil flooded rotary vane pump range.
They will probably be more expensive then GSE however.
Take a look at Gast products:
No experience with GSE.
Ted
No experience with GSE.
Ted
- Status
Similar threads
- Locked
- Question
