lostsheep
Petroleum
- May 6, 2005
- 3
I'm looking for a small diamenter cable splice. I need to connect 2 x 16AWG wire and then push the connection through a hole no larger then 0.250". The connection must use crimps (no solder) as well as be insulated (no heat shrink) as the connection will be made in a hazardous environment. To top it off it needs to be able to handle up to 350°F.
If anyone can point me in the right direction it would be greatly appreciated.
Lost Sheep
If anyone can point me in the right direction it would be greatly appreciated.
Lost Sheep