Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

slug catcher simulation

Status
Not open for further replies.

lorenzo67

Chemical
Dec 5, 2007
25
Hello everybody,
can someone help me in slug simulation with
pipesim or pipephase.

Thanks
 
Replies continue below

Recommended for you

I need a procedure for pipesim or pipephase simulation
 
I have simulated the my pipe line but I don't understand how use the results for sizing slug catcher.
Can somebody explain to me?

Thanks
 
OK... I'll bite.

Being from the Northwest, I have my own visualization of a slug catcher. [bigsmile]

What is your technical understanding of the term?

Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask
 
Are there liquids in the stream, if so what is the liquid flowrate and the gas flowrate. What flow pattern do you have? Size the slug catcher to capture the largest amount of liquids coming in over the critical time period.

**********************
"The problem isn't working out the equation,
its finding the answer to the real question." BigInch
 
thanks all for the answers.
I hope that I'm designing my slug catcher correctly.
 
Very good idea Big.
I think that I will do that
 
One of the better ideas I had today.

Seriously, if you run into something specific, come back. Its just difficult to approach this in a general all-inclusive manner, other than to give you ione's paper.

**********************
"The problem isn't working out the equation,
its finding the answer to the real question." BigInch
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor