Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Slowww Commands//Wait time...... Civil 3D Desktop Companion

Status
Not open for further replies.

Hoagie

Civil/Environmental
Joined
Feb 2, 2005
Messages
198
Location
US
My machine over the last few weeks has become really, really slow....like 20-30 seconds between commands, and while performing Undo, and going in-and-out of viewports. It's painful. I'm running 2008 Civil 3D Desktop Companion. Have any of you advice?




 
Hi Hoagie,

Yep. You need to clear some disk space, optimize your hard drive, purge your drawing and possibly change where AutoCAD writes it's swap files.

You'll find you'll need to do this regularly, CAD packages can be hard on hard drives.

HTH
Todd
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top