When I make a draft file of an assembly it seams that everything I do with it is very slow. Even just flipping over to an assembly window from the draft and the other way around. I've defraged, that helped some. I got ride of all the v16 folders, that helped some also. Any other ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
slow changing from draft to assembly
- Thread starter mhafele
- Start date
beachcomber
Mechanical
Hi mhafele
I find that returning to a drawing of a large assembly can take quite a long time.
Is it because Solid Edge is checking whether the views are up-to-date, so as you get more views/bigger assemblies the amount of data to be checked increases and takes longer ?
Maybe someone can confirm that Solid Edge does this.
On small assemblies it's not so noticeable.
Big assemblies also means big drawings.
beachcomber
I find that returning to a drawing of a large assembly can take quite a long time.
Is it because Solid Edge is checking whether the views are up-to-date, so as you get more views/bigger assemblies the amount of data to be checked increases and takes longer ?
Maybe someone can confirm that Solid Edge does this.
On small assemblies it's not so noticeable.
Big assemblies also means big drawings.
beachcomber
- Status
Similar threads
- Locked
- Question
- Locked
- Question