in inner diameter sizing for piping of production manifold for multiphase well , are we use the same correlations and procedure as we sizing flowline or there is special requirement for this case , also is the flow regime and flow assurance study need to be consider when sizing wellhead piping or can be neglected with reference to the limit size & dimensions of the manifold in comparing with pipeline
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
sizing piping for wellhead production manifold
- Thread starter kald
- Start date
Similar threads
- Locked
- Question
- Question
- Question