TheEverest
Mechanical
Dear all,
Can anyone help me decide the nominal hole size for a skirt access in a skirt of height 4'-0"?
Can anyone help me decide the nominal hole size for a skirt access in a skirt of height 4'-0"?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Size of Openings in Skirt
- Thread starter TheEverest
- Start date
- Status
Opening in skirt may be circular, oval, etc.
“See Pressure Vessel Design Manual”, by D. Moss and “Presuure Vessel Design Handbook”, by Bednar
Also as Tailing Trunnion:
Utilizes reinforced openings in skirt with through pipe. Pipe is removed after erection and the openings used as
skirt manways.
Regards
“See Pressure Vessel Design Manual”, by D. Moss and “Presuure Vessel Design Handbook”, by Bednar
Also as Tailing Trunnion:
Utilizes reinforced openings in skirt with through pipe. Pipe is removed after erection and the openings used as
skirt manways.
Regards
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
