Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

site classification per IBC for pile foundations

Status
Not open for further replies.

kozera

Geotechnical
Joined
Oct 4, 2005
Messages
9
Location
US
For a pile supported pier structure, when one determines the average properties of the soil in the top 100 feet, per IBC Table 1615.1.1, does this start at the top of the bearing layer for the piles or at the mudline?
thanks for any help
 
The seismic site class is independant of the depth of the foundation. Seismic loads are both axial and lateral. The movement of the upper soils during a seismic event will induce lateral and downdrag forces on the deep foundation.

Therefore, to answer your question, you start from the ground surface.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top