Hello, I need to model a cilinder of 80 mm with an 60 mm concentrical hole, in the top of this, i need to create a sinusoidal wave, I have done a example in AutoCAD, you can see the attached figure, but this is only made with circular fillets, only for illustration proposits. I need a real sinusoidal wave in the top. How can I do this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
sinusoidal
- Thread starter Oliveros
- Start date
jeff4136
New member
- Dec 5, 2002
- 215
Go to Ad$k's Inventor forum and search for "barrel cam" or "cylindrical cam". There are example models posted that should get you started in the right direction.
While the geometry may not be accurate (I'm not sure I'm imagining what you are describing) you will probably find the Emboss feature is what you'll want.
While the geometry may not be accurate (I'm not sure I'm imagining what you are describing) you will probably find the Emboss feature is what you'll want.
- Status