singularity and meshing control

[TeQie]

Dear all members,


I am considering how to manually control the meshing of my part as I found a lot of singularity and out of sense stress value at some local areas through out stress analysis...Anyway, I am using wildfire 2.0. Step by step procedure will be so much appreciated.

 

[muadib3d]

well You can not control mesh in Pro\M as You do in other software with h-type of elements

you can do it but in specified way by creating for example volume regions

check this links out:


http://www.designkb.com/tips.php?name=0&tool=11

http://www.tsdengineering.com/index.html

http://www.elite-consulting.com/pro mechanica hints ti ps%20tricks.htm

 

[miya]

TeQie,


Here are some methods for controlling mesh density.


Ray Miya.


---


1. AutoGEM Control


- specify Edge Distribution: number of nodes and interval ratio
- choose AutoGEM, Control


2. Surface Regions


- control element edges
- choose Insert, Surface Region


3. Volume Regions


- control element edges
- choose Insert, Volume Region


4. Datum Points


- element vertices at datum points


5. Datum Curves


- control element edges
- choose AutoGEM, Use Datum Curves


6. AutoGEM Settings


- control global settings
- choose AutoGEM, Settings, Limits


7. Detailed Fillet Modeling


- choose AutoGEM, Settings, Detailed Fillet Modeling

 

[TeQie]

As i understand, surface or volume region are used to create a specific shape or local area/region for constraint or applied force purpose..I still don't see how it can control the density of the mesh at some area...please advise...

 

[miya]

AutoGEM elements will not span across the volume regions.


Elements will automatically be connected across volume regions.


Example Use of Volume Region:


Contact analysis and want to capture high gradient localized Hertzian stresses: create small volume region around contact area to create small elements inside volume region.

 

[oasis]

Hi,

You can do this (I think it work in independant mode) .

in the r