Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

single axle to dual axle 1

Status
Not open for further replies.

XpertShot

Structural
Joined
Oct 15, 2007
Messages
1
Location
US
Hi,

I am comverting a single axle trailer with a weight capacity of 1700 pounds, into a dual axle trailer. The second axle has a rated weight capacity of 800 pounds. Before I make the conversion I wanted to know whether or not the weight capacities would combine to make a total of 2500 pounds of support.

-Xpert
 
It depends on how the axles share the load as you move over uneven surfaces, like dropping over kerbs etc.

There are load sharing and non load sharing mechanisms.

If non load sharing, it would also depend on compliance rates.

If the load sharing is via a rocker arm, simple leverage calculations re the pivot point will predict the load share.

Regards

eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top