Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sine Wave Filter output VFD

Status
Not open for further replies.

Guilhermebr

Electrical
May 3, 2015
49
Hi.

Does anyone use the Mirus or MTE sine waves filter LCL at the output of vfds? Is the voltage waveform really sinusoidal?


Guilherme S.
BRAZIL
 
Replies continue below

Recommended for you

No, but a lot more so than without it...
I use TCI's, but the concept is the same.

Without a filter:
URL]


With a filter:
URL]



" We are all here on earth to help others; what on earth the others are here for I don't know.
" -- W. H. Auden
 
Thanks.

Do you had problems with excessive drop voltage in motor? Mirus showed me that his creation with 2 windings, one opposite another winding dont have drop voltage.

do you know about it?

GS
 
Voltage drop is a potential (no pun intended) issue, but excessive is uncommon. I have never had it become an issue, but I have heard of it, only in applications where the motor was sized very very close to the required load.


" We are all here on earth to help others; what on earth the others are here for I don't know." -- W. H. Auden
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor