Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

simulation of screw

Status
Not open for further replies.
seiff

seiff

Mechanical
Joined
Nov 16, 2011
Messages
5
Location
TN
i try to simulate the operation of tying a screw end see the efect of parameters like speed end friction. the problem that i dont know how give the screw the helicoidal motion. help me
 
Sort by date Sort by votes
rotate it and push it at the same time. you will have to make a helical thread on the screw and on the base material.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question Question
Excessive Distortion in Press Hardening Simulation
Replies
1
Views
7K
FEA way
FEA way
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D
Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
8K
Adil Memet
Adil Memet
Gov45
  • Locked
  • Question Question
Fatigue simulation
Replies
2
Views
659
Gov45
Gov45
Gov45
  • Locked
  • Question Question
Non linear fatigue simulation
Replies
7
Views
4K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top