Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simulation of Hydro Rotor System using Abaqus

Status
Not open for further replies.
Tobevibrationexpert

Tobevibrationexpert

Mechanical
Joined
Aug 13, 2008
Messages
6
Location
CA
Hi,

I am planning to work on Finite Element Simulation of hydro turbine-generator Rotor System using Abaqus 6.7 to analyze the vibrational behavior or the Rotor when subjected to certain fault conditions like unbalance, misalignment, rubbing, loose, etc.

Can you please guide me how I should proceed and what are the best resources for the given job?

Thanks
 
Status
Not open for further replies.

Similar threads

gyanendra singh
  • Locked
  • Question Question
sloshing simulation in abaqus
Replies
1
Views
856
GregLocock
GregLocock
Harisrimt
  • Locked
  • Question Question
Shock test simulation using Ansys workbench
Replies
2
Views
2K
hacksaw
hacksaw
W
  • Question Question
Root cause of harmonic oscillation in telescopic column
Replies
8
Views
3K
WestyTea
W
LS_SMS
  • Locked
  • Question Question
What is Significance of 33Hz in Seismic?
Replies
6
Views
3K
IRstuff
IRstuff
kingnero
  • Locked
  • Question Question
Welding on top of rail, to avoid noise in curves
Replies
4
Views
5K
kingnero
kingnero

Part and Inventory Search

Sponsor

Back
Top