Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

simulating welds in fea

Status
Not open for further replies.
panjour

panjour

Automotive
Joined
May 10, 2003
Messages
5
Location
US
how do be model welds in chassis frames in fea analysis?
soembody pla let me know
thx
panjour
 
Sort by date Sort by votes
It depends on why you want to model them and the kind of weld you want to model, ie full penetration or fillet, or if you want to model the welding process to check for weld deformation of plates in the thin structure.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
oharag11
  • Locked
  • Question Question
Modeling/simulating thermal vias - PCB/Electonic thermal analysis?
Replies
0
Views
722
oharag11
oharag11
wacee
  • Locked
  • Question Question
Hot spot stress at welds
Replies
0
Views
752
wacee
wacee
EdwardNigma
  • Question Question
What boundary condition techniques do you use to keep FEA models realistic?
Replies
6
Views
19K
JoshPlumSE
JoshPlumSE

Part and Inventory Search

Sponsor

Back
Top