Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simulating high viscosity fluid

Status
Not open for further replies.
wbrokow1

wbrokow1

Mechanical
Joined
Oct 8, 2003
Messages
11
Location
US
I have FEMAP 10.3
Is there a way to model a pendulum whose pivot pin is in a high viscosity fluid? I would like to vary the pin and holes' clearance with the high viscosity between the two.
Thanks for any guidance

 
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
MODAL ANALYSIS WITH FLUID
Replies
3
Views
2K
karachun
karachun
jonny1230
  • Locked
  • Question Question
Applying Torsion to Composite Cylinder - Very high shear modulus
Replies
5
Views
552
jonny1230
jonny1230
upzheng
  • Locked
  • Question Question
Explain high stress spot in bolt joint with femap/NX Nastran
Replies
3
Views
576
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top