Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simulating high viscosity fluid

Status
Not open for further replies.
wbrokow1

wbrokow1

Mechanical
Oct 8, 2003
11
I have FEMAP 10.3
Is there a way to model a pendulum whose pivot pin is in a high viscosity fluid? I would like to vary the pin and holes' clearance with the high viscosity between the two.
Thanks for any guidance

 
Status
Not open for further replies.

Similar threads

D
  • Question
MODAL ANALYSIS WITH FLUID
Replies
3
Views
2K
karachun
karachun
jonny1230
  • Locked
  • Question
Applying Torsion to Composite Cylinder - Very high shear modulus
Replies
5
Views
395
jonny1230
jonny1230
upzheng
  • Locked
  • Question
Explain high stress spot in bolt joint with femap/NX Nastran
Replies
3
Views
437
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top Bottom